2.6KG/H Fish Farm Aerator Aquaculture Farm Pond Aeration Paddle Wheel 1.0HP

Place of Origin China
Brand Name SUNOLTA
Model Number FCPWA-1.5
Minimum Order Quantity 1 set
Price 2000USD+
Packaging Details Carton
Delivery Time 3-15 Work Day
Payment Terms T/T
Supply Ability 60000 SETS/YEAR

Contact me for free samples and coupons.

Whatsapp:0086 18588475571

Wechat: 0086 18588475571

Skype: sales10@aixton.com

If you have any concern, we provide 24-hour online help.

Product Details
Motor Permanent Magnetic Synchronous DC Motor Controller Frequency Conversion Controller
Frame 304# Stainless Steel Shaft 304# Stainless Steel
Float PP Impeller PP
High Light

2.6KG/H fish farm aerator


110V fish farm aerator


farm pond aeration 1.0HP

Leave a Message
Product Description

1hp Aerator 1hp Fish Farming Aquaculture Aerator Paddle Wheel Areators Aerating A Pond


Oxygen does not easily dissolve into water, and water holds far less oxygen than the same volume of air. While atmospheric oxygen does naturally dissolve into water, the process is very slow and only occurs where atmosphere and water interact. The easiest way to increase the rate of oxygen transfer is to increase the area where atmosphere and water are interacting, by agitating the water. Natural agitation comes in the form of wave-action from wind. When wind creates waves, the surface area of the water increases, which increases the rate of oxygen transfer into the water. Additionally, the energy stored in the waves that is released when they splash into the bank or hard surfaces creates small areas of turbulence below the surface that helps transport oxygen deeper into the water. Aerators are specifically designed to agitate/oxygenate large volumes of water. Circulators are specifically designed to propel large volumes of water. Some models combine aeration and circulation simultaneously. The best aerator/circulator for your situation depends on your needs, the physical characteristics of your pond (especially depth), your budget, aesthetic preferences, and more. The appropriate size and location of aerators also varies greatly from pond to pond. In general, the typical fishing pond can be sufficiently aerated with 0.5 to 1.0 HP per surface acre. Because there are so many variables at play when selecting an aerator, it is best to contact the aerator manufacturer for guidance and sizing estimates. A partial list of aerator providers is included at the bottom of this page. For more detailed explanations of dissolved oxygen dynamics, aerator efficiency, and other considerations, refer to the Additional Resources linked at the bottom of this page. Below are examples of the general types of aerators and circulators.




Paddle Wheel Aerator
Paddle Wheel Aerator
Paddle Wheel Aerator
Loading Area
Power Efficiency
Oxygen Capacity
Single / three phase
Single / three phase
Single / three phase
One 20"ft
85 sets
70 sets
66 sets



Product Features
● Easy to use: As long as the pump is put into the water and connected to the power supply, it can start to pump water, no need for a port, not afraid of rain, not restricted by dust collection, light weight, and extremely convenient to move.
● Energy saving and electricity saving: Change the suction lift to the pressurised water lift, no matter which specification and model, the water inlet is always at 25-50cm below the water surface, and is always in the best suction position, which not only shortens the pipeline but also does not need to install a bottom valve, so it can save energy. Electricity.
● Long service life: The shaft seal of the floating pump is not affected by sedimentation at the bottom of the water, there is no deep water pressure, and it is impossible to sink into the mud, so the shaft life is long.
● Increase crop growth: Since the water on the surface of the river sucked by the floating pump is higher than the water temperature at the bottom of the river, it is beneficial to the growth of crops such as rice. Taking rice as an example, the yield per mu of early rice can generally be improved compared with the control group.

The waterwheel type aerator is developed by our company based on the latest international popular models and has made major breakthrough improvements in the transmission mechanism.

● Adopt arc-shaped bevel gears, instead of turbine worm, energy saving and high efficiency, more than 20% power saving than traditional models.
● The curved bevel gear is made of chrome-manganese-titanium alloy steel, the surface is carbonitrided, with high hardness and long service life.
● Adopt mechanical seal to ensure no oil leakage pollution.
● Protective photos are installed inside the motor to avoid accidental burnout of the motor.
● The whole machine is made of plastic pontoon, nylon impeller, stainless steel shaft and bracket.


Waterwheel aerator has the comprehensive function of oxygenation, stirring and air explosion. It is the most used oxygenator at present, with an annual output value of about 150,000 units. Its oxygenation capacity and dynamic efficiency are better than other models, but the operation noise is larger, and it is generally used for pond breeding with a depth of more than 1 meter.



1. Arcuate-bevel gears are used instead of worm gears, thereby economizing on energy with high efficiency,and saving over 20% electric energy over traditional models.

2. The arcuate-bevel gear is made of chromium-manganese-titanium alloyed steel with carbonitriding on the surface, adding rigidity and providing longer service life.

3. Mechanical seal is used to ensure no oil leakage pollution.

4. Protector is installed inside the machine to avoid motor being burnt accidentally..

5. High efficiency oxygen transferring ability with 2.6kgs O2/h.

6. Have good water current circulation as the making of large area water wave.

7. Easy assortment, operation and maintenance
8. Durable service life.

2.6KG/H Fish Farm Aerator Aquaculture Farm Pond Aeration Paddle Wheel 1.0HP 02.6KG/H Fish Farm Aerator Aquaculture Farm Pond Aeration Paddle Wheel 1.0HP 12.6KG/H Fish Farm Aerator Aquaculture Farm Pond Aeration Paddle Wheel 1.0HP 22.6KG/H Fish Farm Aerator Aquaculture Farm Pond Aeration Paddle Wheel 1.0HP 3



Q1. Are you a manufacturer or trading company?
A: We are a manufacturer.

Q2. What's your company's main products?
A: Our company is specialized in kinds of aerators for fish pond and shrimp pond, such as paddlewheel aerator.

Q3. What's the MOQ for your production?

Q4. What's the lead time?
Usually about 15days-20days, if large quantity, will check the production line and arrange the schedule.

Q5. What's your payment term?
A: 30% T/T in advance, the rest pay off before delivery.

Q6. Where is your loading port?
A: Ningbo, or else port in China as your requirements.