SS304 Fish Farm Air Pump Aerator For Fish Farming Pond 12140m2 To 40468m2

1hp Aerator 1hp Fish Farming Aquaculture Aerator Paddle Wheel Areators Aerating A Pond

Paddle wheels are the aerator of choice for most pond aquaculture operations because they add more oxygen per dollar of electricity than other types of aerator in relatively shallow ponds. They consist of a motor mounted to a floating platform with a large rotating drum or cylinder ringed with broad metal or plastic flaps that splash into the water and lift it into the air. Paddle wheels operate at fairly high RPM's and they can create considerable circulation at the surface which helps distribute the oxygenated water to other parts of the pond. In rectangular ponds, a single powerful paddle wheel can be located on one of the long banks facing straight across the pond towards the other long bank to create two areas of circulation which can keep the entire pond aerated. While highly effective, paddle wheel aerators are typically expensive, heavy, and not considered one of the more attractive options in aeration/circulation.

Product Features
● Easy to use: As long as the pump is put into the water and connected to the power supply, it can start to pump water, no need for a port, not afraid of rain, not restricted by dust collection, light weight, and extremely convenient to move.
● Energy saving and electricity saving: Change the suction lift to the pressurised water lift, no matter which specification and model, the water inlet is always at 25-50cm below the water surface, and is always in the best suction position, which not only shortens the pipeline but also does not need to install a bottom valve, so it can save energy. Electricity.
● Long service life: The shaft seal of the floating pump is not affected by sedimentation at the bottom of the water, there is no deep water pressure, and it is impossible to sink into the mud, so the shaft life is long.
● Increase crop growth: Since the water on the surface of the river sucked by the floating pump is higher than the water temperature at the bottom of the river, it is beneficial to the growth of crops such as rice. Taking rice as an example, the yield per mu of early rice can generally be improved compared with the control group.

The waterwheel type aerator is developed by our company based on the latest international popular models and has made major breakthrough improvements in the transmission mechanism.

● Adopt arc-shaped bevel gears, instead of turbine worm, energy saving and high efficiency, more than 20% power saving than traditional models.
● The curved bevel gear is made of chrome-manganese-titanium alloy steel, the surface is carbonitrided, with high hardness and long service life.
● Adopt mechanical seal to ensure no oil leakage pollution.
● Protective photos are installed inside the motor to avoid accidental burnout of the motor.
● The whole machine is made of plastic pontoon, nylon impeller, stainless steel shaft and bracket.

Waterwheel aerator has the comprehensive function of oxygenation, stirring and air explosion. It is the most used oxygenator at present, with an annual output value of about 150,000 units. Its oxygenation capacity and dynamic efficiency are better than other models, but the operation noise is larger, and it is generally used for pond breeding with a depth of more than 1 meter.

Advantages:
1. Arcuate-bevel gears are used instead of worm gears, thereby economizing on energy with high efficiency,and saving over 20% electric energy over traditional models.

2. The arcuate-bevel gear is made of chromium-manganese-titanium alloyed steel with carbonitriding on the surface, adding rigidity and providing longer service life.

3. Mechanical seal is used to ensure no oil leakage pollution.

4. Protector is installed inside the machine to avoid motor being burnt accidentally..

5. High efficiency oxygen transferring ability with 2.6kgs O2/h.

6. Have good water current circulation as the making of large area water wave.

7. Easy assortment, operation and maintenance
8. Durable service life.

FAQ

Q1. Are you a manufacturer or trading company?
A: We are a manufacturer.

Q2. What's your company's main products?
A: Our company is specialized in kinds of aerators for fish pond and shrimp pond, such as paddlewheel aerator.

Q3. What's the MOQ for your production?
A: NO MOQ.

Q4. What's the lead time?
Usually about 15days-20days, if large quantity, will check the production line and arrange the schedule.

Q5. What's your payment term?
A: 30% T/T in advance, the rest pay off before delivery.

Q6. Where is your loading port?
A: Ningbo, or else port in China as your requirements.